Skip to product information
1 of 1

Sculpey Premo™ Veri Peri Mermaid

Sculpey Premo™ Veri Peri Mermaid

Designed by Cindy Luo
Read More
A mermaid rising from some Veri Peri waves created in an upcycled glass mug is a fun afternoon project. Add some resin for the water and she will swim happily on your desk! TIME TO COMPLETION: Apx. 90 minutes including baking and resin curing
Read Less
  • Silicone sculpting tools, dotting tool, needle tool
  • Pasta machine
  • Old glass mug
  • Toaster oven
  • UV resin, pigments, glitter, and UV lamp
  • Paint brushes
  • Soft pastels (blue, purple)
  • Industrial glue
  • White acrylic paint
View full details
Project Instructions
    Getting Started:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven-Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 30 minutes per 1/4" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
I started out with this challenge thinking of using a glass mug for the upcycled component. It was old, unused, and the ideal size for the project. I wasn’t certain at this point what I wanted to make, but the mug suggested something involving fluids.
Photo of glass mug used for project
Using a tablet and my favorite digital drawing app, I sketched out the loose idea for my sculpture. One main requirement for this project was to use Pantone’s color of the year, Very Peri, which steered me towards a dreamy, pastel color palette. Inspired by oceans, nature, and the idea of motion, I landed on a concept that combined the notions of breaking free and new beginnings.
Artist sketch of the mermaid
I rolled out thin sheets of translucent white polymer clay using a pasta machine. I specifically used unconditioned Premo Translucent for this step because its firm texture allowed the clay to form these rough edges.
Create thin, rough sheets of Translucent clay
Folding the clay back and forth like an accordion allowed me to create what would become the waves. I made them in a variety of sizes and tried not to make them too uniform--the less perfect it is, the more natural it appears.

Tip: Apply a small amount of cornstarch on one or both sides of the clay with a paint brush before folding them so they are not too sticky!
Loosely fold clay back and forth to create waves
After assembling all the pieces on the outside of the mug, I had my waves! I prebaked the entire thing, mug included, in the oven for 375°F for 10 minutes.
Assemble wave pieces on mug. Bake for 10 minutes.
After baking, I mixed equal parts of Premo White clay and Clear Liquid Sculpey in a small paint pot to make this very sticky concoction. I wanted to add a bit of detail and volume to the edges of the waves.
Mix Premo White and Clear Liquid Sculpey
I poked and prodded the very soft clay until it assumed the desired roughness with the help of some silicone sculpting tools and ball tools..
Apply mixture to edges of waves and use tool to create a foamy look.
After baking once again for 275°F and 10 minutes, I applied generous amounts of soft pastels to the waves with a fluffy paint brush. Be sure to coat both sides of the clay so that everything is fully covered!
Bake for 10 minutes and add soft pastels with brush.
Here are the finished waves! I decided to go with a blue-to-peri gradient to show an outburst of the Very Peri, as if new ideas and hope are springing from old waters. After adding a touch of white acrylic paint to the edges of the clay, the waves are basically done! I used some industrial glue to secure the clay to the mug.
Secure clay to mug with glue. Add White paint to edges of waves.
Moving on to the mermaid, I mixed Premo Beige with Translucent and pinches of Cad Yellow and Orange Premo until I was happy with the shade. I formed and pinched a rectangular prism of clay until it became the general shape for her torso. Although creating armatures using wire and aluminum foil is a popular technique for making dolls and humanoid sculptures, this one was small enough that it didn’t require it.
Mix Premo Beige with Translucent and small pinches of Cad Yellow and Orange for skintone.
I sculpted a loose head shape as well using my fingers and some silicone tools and stuck a wire through the neck to make it more secure when I later attach it to the body. Both these parts were prebaked for 10 mins before the next step.
Sculpt body and head with wire in neck. Bake 10 minutes.
I poked a hole in the top of the torso with a needle tool, attached the head using Clear Liquid Sculpey, and added several features as well, such as the rose on her mouth, before prebaking again.
Attach head using Clear Liquid Sculpey.
I added a few pieces of periwinkle-colored clay for the hair. Then, I formed a long, tapered snake of clay for the tail and smoothed it onto the bottom of the torso. I bent it in a way that followed the curve of the mermaid’s body so that it looked most natural.
Add a few pieces of periwinkle colored clay for hair. Form long tapered tail and smooth on bottom of torse.
To create the texture of the scales, I cut a small straw in half so that it formed a ‘u’ shape, and pressed it into the clay repeatedly. I textured from the top of the tail to the bottom, ensuring the pattern is even and uniform.

Bake again before finishing off the end of the tail and adding the final hair pieces. Instead of adding bare arms, I gave her puffy sleeves, which were made in a similar fashion to the waves, using TLS to adhere them.
Texture tail cales with small straw. Add arms and final hair pieces.
For the finishing touches, I brushed Liquid Sculpey Pearl mixed with purple mica pigments onto the tail. Then, of course, gave the entire piece a final bake for 30 mins at 275°F. This next step is optional, but I also coated the mermaid and the waves in a thin layer of UV resin as well, to give the piece a dewy look.
Mix purple mica powder into Pearl LS and brush on tail.  Bake piece for 30 mins at 275°F.
After everything was baked and finished, I filled 1/4 of the mug with blue UV resin and glitter. I cured the piece under a UV lamp for 10 minutes, and the sculpture is done!
After baking, fill part of mug with blue UV resin and glitter. Cure the resin with UV lamp.