Skip to product information
1 of 1

Sculpey Premo™ Sutton Slice Terra Cotta Earrings

Sculpey Premo™ Sutton Slice Terra Cotta Earrings

Designed by Cindi McGee
Read More
Tone on tone dimensional details make these Sculpey Premo™ Terra Cotta colored earrings stand out!TIME TO COMPLETION:30 minutes to make/30 minutes to bake
Read Less
  • Deeply etched stamp
  • Small cutter or template for top piece of earring
  • Cutter or template for bottom piece of earring (or hand cut with a craft knife)
  • Parchment paper
  • Post earring backs and stops (2 of each)
  • Gold tone jump rings (2)
  • Jewelry pliers
View full details
Project Instructions
    Getting Started:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven-Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

    Baking (also called Curing):
Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake/cure clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 30 minutes per 1/4" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking/curing; however please note that the baking/curing times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
Sheet out the conditioned clay on a medium setting and cut into 2 pieces large enough to cover your selected stamp.
photo shows
Place one sheet over the stamp. Press the clay into the stamp. Be sure to use enough pressure to ensure the clay is uniformly down in the recessed area of the stamp.
photo shows clay pressed into stamp
Use a sharp blade to carefully cut away and remove the clay on the surface of the stamp, revealing the clay pushed down into the recessed areas.
photo shows cutting away
Place the second sheet of clay over the surface of the stamp. Press firmly over the surface.
photo shows as described
Flip the sheet over so the stamp is on the top. Carefully lift and remove the stamp to reveal the transferred details.
photo shows texture being removed and transferred details
Place cutter/template on textured clay sheet and cut out shapes for bottom of earrings. I cut two pair from this sheet of clay.
photo shows 4 pieces cut as described
Roll the scrap clay again to form a sheet of clay. Use cutter/template to cut two pieces for each of the top portions of the earrings (for 1 pair, cut 4 of these).
photo shows as described
Sandwich an earring post between two of the top pieces for each earring. Add a touch of liquid clay or clay adhesive between the layers to help secure the post.

NOTE: If you wish, you can use a needle tool to place the holes for assembly before baking. (see next step)

Bake as directed in Step 1 above.
photo shows assembling post tops
If you haven’t already put assembly holes in your pieces before baking, you can drill holes at bottom of post pieces and top of drop/dangle pieces.
Use jewelry pliers to add jump ring to connect the pieces for each earring.
photo shows assembling the earrings