Skip to product information
1 of 1

Sculpey III® Violet Glitter Crystal Votive

Sculpey III® Violet Glitter Crystal Votive

Designed by Phoebe Doehring
Read More

Create a glittering and dramatic addition to your table with this faux crystal candle holder!


NOTE:  All the crystal shapes for this project are made using the Skinner Blend technique. Please refer to the Polyform website for directions on how to make the Skinner Blend.

Read Less
  • Small Clear Votive Candle Holder 1” to 1.5 inches in diameter
View full details
Project Instructions
    Getting Started:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven-Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 30 minutes per 1/4" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
Condition 1/2 block of Violet Glitter clay. Run it through the clay machine on the #1 setting. Cut out a 2” circle from this sheet of clay. Repeat this process using Translucent clay.

Stack the Translucent circle on top of the Violet Glitter circle. Place votive candle in the center of the circle. You will be building your crystal shapes around the candle on this base.
You will be making approximately 15 to 20 crystal shapes of varying sizes. 10 will be on the larger side approximately 1 to 2 inches and the other 10 will be smaller approximately .5 to .75” in size.

Create the Skinner Blend using the Violet Glitter and Translucent clay. Once the blend is made roll the sheet into a cylinder shape and roll lightly. Press this cylinder into a 4-sided shape now.
Use your clay blade and cut the square edges away about 1/8” in. Cut pieces away from the more Translucent end to create the crystal points. Set aside your crystal shape on some waxed paper and repeat this process until you have all your crystal shapes complete.
Roll together the remaining remnants of clay and make 10 to 15 tiny crystal shapes for fillers.
Start attaching your crystals around the votive.
Start with the larger ones first pressing them on at an angle. Use a drop of Liquid Sculpey to help attach. You may have to trim the bottoms to get them to fit on the base how you want them.
Once the larger crystals are on add the smaller crystals. Use your little extra crystals to fill in the bottom and any gaps around the votive.
Remove the candle votive. Bake according to package directions. Allow to cool completely. Place votive back in place. Enjoy!