Skip to product information
1 of 1

Sculpey III® Rainbow Earrings

Sculpey III® Rainbow Earrings

Designed by Amy Koranek
Read More

Create your own rainbow style earrings with this simple and easy project. Mix up the colors to create your own statement accessories.


30 Minutes to make and bake.

Read Less
  • 2” Silver tone head pins (2)
  • Silver tone ear wires (2)
  • Wire cutters
  • Round nose jewelry pliers
  • Flat nose jewelry pliers
View full details
Project Instructions
    Getting Started:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven-Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per 1/4" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
For the rainbow earrings you will just need 1/16 bar of each of the colors.
Roll each of the pieces of clay into a long thin rope 7.5” - 8” in length.
Lay the ropes side by side and carefully pinch them together all the way down their length to make sure they attach to each other. Make sure to use a gentle touch so that the ropes are not deformed or compressed too much.
Cut the ropes in half so that you have two equal length sections approximately 4” each.
Bend the ropes just slightly to indicate the center of the pieces (top rainbow). Push a head pin into the center going up from the bottom. Push the head pin in all the way and bend the rainbow into its complete arc. Your fingertip will make a good guide in the center of the arc to make a nice smooth bend.
Repeat Step 6 for the second rainbow. Trim across the bottom of each rainbow with the knife tool making them as long or as short as you like.
Bake the rainbows following the baking instructions for Sculpey®III. When the earrings are completely cool, trim the tails of the head pins to 3/4”. Curl loops in each of the tails to make a neat little eye at the top of each rainbow. Open ear wire loops with flat nose pliers and attach to the rainbows.