Skip to product information
1 of 1

Sculpey III® Marbled Ring Dish

Sculpey III® Marbled Ring Dish

Designed by Amy Koranek
Read More
Make a ring dish for yourself or for your friends and family. A useful little stash beside the sink for holding your rings while you wash up. Make them in every color combination you can imagine, and each one will be just as pretty as the next one. COMPLETION TIME: 45 Minutes to make and bake
Read Less
  • Bowl form such as a Fat Daddio’s hemispherical baking bowl 3”-4” diameter. You can also use any glass or metal bowl for a form.
View full details
Project Instructions
    Getting Started:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven-Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per 1/4" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
These instructions are for a beginning marbling technique. Feel free to use your favorite marbling technique if you have one.

You will need 1/2 bar Teal Pearl, 1/4 bar Pearl, and 1/4 bar Purple. Condition and shape each color into lumps.
condition and shape each color into lumps
Push the lumps together to form a rough ball.
push the lumps to form a rough ball
Roll into a log and twist slightly.
roll into a log and twist slightly
Coil the log up.
coil the log up
Roll the coil into a ball. If the colors are still very neat and organized, you can mess them up a bit by gently kneading the ball a few times. You may find that blending the colors like this adds more visual interest to your finished dish.
roll coil into a ball.
Flatten the ball into a patty. I like this side (showing) the best so I will make it the inside of the bowl. I have flattened the patty out on a wax deli sheet making it easier to handle from this point.

Roll over the patty with the Acrylic Clay Roller to make sure it is even in thickness.
flatten with acrylic roller
Flip the patty over, so that your least favorite side is now facing up.

Use finger pressure on the outer edges all the way around to force a bevel along the outer rim.
Use finger to press a bevel along outer rim
Press the patty, wrong side facing up, onto the bottom of the bowl form. I like to use hemispherical bowls because the curve is the same no matter where you place the clay.
press patty, wrong side up on bowl
Make sure the interior of the bowl is in contact with the bowl form and that air bubbles are not trapped between the clay and the form.

Press the beveled edge down tight to the sides of the form.
press beveled edges down tight to form
Flip the bowl form over so that the clay is now resting on the work surface. Allow the weight of the clay to steady the bowl. Press down with even pressure across the bowl form to flatten the bottom of the clay.
flip bowl over and press down to slightly flatten bottom
You should notice a flat spot on the bottom of the clay. Make sure the flat spot is as centered as possible so that the little dish will sit nicely when complete.

Bake the clay dish on the form with the form sitting on the baking sheet. Follow the baking instructions for Sculpey III. Allow to cool completely before handling.
bake on the form with baking instructions
Carefully pop the clay dish off of the form. If necessary, you can use the tip of the knife shaped tool to carefully lift the clay off of the form.
pop clay off form. Use thin tool to help.