Skip to product information
1 of 1

Sculpey Premo Pastel Color Spectrum Necklace

Sculpey Premo Pastel Color Spectrum Necklace

Designed by Amy Koranek
Read More

This pastel color statement necklace that will be perfect with your Spring/Summer wardrobe.

TIME TO COMPLETE:60 minutes to make & bake
60 minutes to assemble


Read Less

• 1” Silver tone head pins (18)
• 6mm Silver tone jump rings (20)
• 18” Silver tone chain
• 20” Silver tone chain
• Silver tone lobster clasps (2)
• Round nose jewelry pliers
• Flat nose jewelry pliers

View full details
Project Instructions
    Getting Started:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.
Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.
Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Oven Safe Work Mat at 275°F (130 °C) for 30 minutes per 1/4" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME. BAKING SHOULD BE DONE BY AN ADULT.
This design is based on a teardrop shape. It’s really important that all of the teardrops are very similar in size. The best way to get them all the same size is to make sure the volume of clay for each teardrop is equal. Start by flattening each pastel color to the exact same thickness. Press them through the pasta machine on the thickest setting or roll conditioned clay to 1/8” with the Acrylic Clay Roller. Cut out two 1” circles from each color using the 1” circle cutter. Now each circle should be very similar in volume. Leave one of each color whole and cut one of each color in half. Lay the circles out from left to right as shown: Apricot 1/2 Apricot and 1/2 Rose Quartz Rose Quartz 1/2 Rose Quartz and 1/2 Pale Amethyst Pale Amethyst 1/2 Pale Amethyst and 1/2 Clearwater Blue Clearwater Blue 1/2 Clearwater Blue and 1/2 Mint Green Mint Green You will have 1/2 Apricot and 1/2 Mint Green leftover.
Completely mix the half and half colors together to form the intermediate colors. Roll each individual color into a ball. Shape each of the balls into teardrop shapes as shown. To make a teardrop it’s easiest if you start with a smooth ball. Then slightly pinch the ball between your thumb and forefinger to form the teardrop.
From the remaining flattened clay in Step 1 cut another 1” circle of each color. Sheet White Premo to the same thickness as the pastel colors. Cut out five 1” circles of White as well. For this series of teardrops, each one will be half White making the colors more muted. Lay out the circles from left to right as shown: 1/2 White and 1/2 Apricot 1/2 White and 1/4 Apricot and 1/4 Rose Quartz ` 1/2 White and 1/2 Rose Quartz 1/2 White and 1/4 Rose Quartz and 1/4 Pale Amethyst 1/2 White and 1/2 Pale Amethyst 1/2 White and 1/4 Pale Amethyst and 1/4 Clearwater Blue 1/2 White and 1/2 Clearwater Blue 1/2 White and 1/4 Clearwater Blue and 1/4 Mint Green 1/2 White and 1/2 Mint Green
Mix each of the color combinations and shape them into balls. Shape each mixture into a teardrop shape as shown
Here’s how the teardrops will look with the darker ones on the top and the lighter ones on the bottom.
Poke a 1” head pin through the bottom of each teardrop shape, seating the head slightly into the clay of each one. Pull the head pin into the clay so that you have at least 1/4” of the pin protruding from the top of the clay teardrop.
Bake all the teardrops following the baking instructions for Premo. When they are completely cool, use the round nose pliers to curl a little eye into each one.
Separate the lighter teardrops from the darker teardrops. Open and attach a jump ring to each eye with the flat nose pliers. Starting with the darker set of teardrops, position the Pale Amethyst teardrop in the center of the 20” chain and close the jump ring attaching it to the chain. Work from the center outward attaching the colors on either side of the central Pale Amethyst. Close the jump rings with the flat nose pliers.
Position the teardrops on the chains in order with the darker colors on the 20” chain and the lighter colors on the 18” chain as shown. Connect the ends of the chains together with a jump ring. Add a lobster clasp to each of the jump rings before closing. Using a lobster clasp on each end of the chain makes the chain easy to wear for both right-handed and left-handed wearers.