Skip to product information
1 of 1

Liquid Sculpey® + Glitter My World Ombré Sparkle Teardrops

Liquid Sculpey® + Glitter My World Ombré Sparkle Teardrops

Designed by Amy Koranek
Read More
Liquid Sculpey Clear teams up with Glitter My World glitters to create these multicolored sparkling earrings perfect for a special night out! TIME TO COMPLETE: 75 Minutes to make, bake, and assemble
Read Less
  • Paper towel
  • Glitter My World .040 chunky glitters in Silver Sparkle, Teal, and Discotheque
  • Crimp bails (2)
  • Silvertone ear wires (2)
  • Flat nose pliers
  • Heat gun - optional
View full details
Project Instructions
    Getting Started with Liquid Sculpey®:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured Liquid Polymer Clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately. - Stir Liquid Sculpey® completely. Thin with Sculpey® Liquid Clay Softener as needed - Wash hands after use (we have found that baby wipes work best)

  • It is important to use oven thermometer when you bake the liquids so that you can ensure your oven is at the correct temperature.
  • Do not microwave the liquids. They must be baked in a Preheated oven at 275 ºF (130 ºC) for liquid colors and 300 ºF (149 ºC) for Clear – Do not exceed baking temperatures.
  • If your piece is less than 1/4” bake for 15 minutes. For thicker pieces that are 1/4” or above bake for 30 minutes.
  • If your liquid project has become yellowed or discolored in the oven, when you remake it, tent it by placing either – folding an index card in half and placing your project under it by using aluminum foil over your project.

Here’s a tip for baking perfectly in silicone molds. Dampen a dish towel with water and wring out as much of the water as you can. Fold the damp towel so that the molds can sit level on top of it. The damp towel will slow down the curing process so that the LS will cure evenly throughout and avoid warping.
Please make sure that your Liquid Sculpey® (LS) liquids are each stirred really well. ESPECIALLY the Clear LS.

Designer’s Note - Clear Liquid Sculpey has a tendency to separate into a liquid part and a lumpy part when left alone over time. If using Clear LS from the bottle, you can insert your favorite stirring stick into the bottle and really scrape the lumps from off the bottom and the sides and stir until the lumps are re-incorporated into the liquid. Then continue stirring until smooth. This is super important because if the liquid is not stirred until smooth, it will not clear completely during heating. Clear LS can also be decanted into a small silicone, glass, metal, or the Sculpey Silicone Mixing Set Measuring Cup. This makes it easier to stir the liquid completely. Just remember to cover the Clear LS when decanted and not in use, to keep dirt and lint out of the liquid.

Fill the top 1/3 of the Elongated Teardrop with White LS.
photo shows mold filled with White LS as instructed
Next, fill the bottom 2/3 of the Elongate Teardrop with Clear LS. Don’t fill the mold to level yet. We need extra space for adding the sparkles.
photo shows as described
Allow the White and the Clear to merge together as they spread.
photo shows as described
Just under the White, add a layer of Silver Sparkle glitter. It’s okay if some glitter gets onto the mold. This can easily be cleaned away later.
photo shows silver glitter strip on mold
Under the Silver Sparkle, add a layer of Teal glitter.
photo shows Teal glitter added in strip
Finally add a layer of Discotheque to fill in the bottom.
photo shows glitter filled to bottom of mold
Add enough White LS on top of the previous area of White LS to fill the mold to level.

Add enough Clear LS on top of the glitter area to fill the mold to level. Use the tip of the Needle Tool to help the glitter submerge just into the Clear LS.
photo shows mold filled to level
Bake the mold following the baking instructions for Liquid Sculpey® above with great tips on using molds. Allow to cool completely and then demold by gently flexing the mold.

Repeat the process to make a second Elongated Teardrop matching the first.

I also made a pair of earrings with Black LS instead of White LS just for fun. The results are shown in this photo.

Designer’s Note - to really pump up the Clear and make it super shiny, you can use a heat gun. Place the baked liquid pieces on a heat safe plate. Turn the heat gun on “HI” and move it slowly back and forth across the pieces. You will see the Clear areas go really clear and turn shiny. When this happens, turn off the heat gun and allow to cool completely.
photo shows as described
To finish the pieces into earrings, you will need 2 pinch bails and two ear wires.
photo shows earring hardware and finished clay pieces
Poke a hole front to back through the baked pieces using the Needle Tool. Make sure the hole is down far enough, about 1/8”, so that the margin remaining will be strong enough to support the hole. This hole is just a pilot hole to help position the pinch bail exactly where you want it. Repeat by poking a pilot hole in the second piece.
photo shows the pilot hole in front completed
Position the prongs of the pinch bail into the pilot holes. You can use your fingers to apply enough pressure to help the prongs close in and find the pilot holes.
photo shows pinch bail in place
Once you have the pinch bails in perfect position, close them further using flat nose pliers.
photo shows closing pinch bail
The ear wires are now ready to be attached to the eyes in the pinch bails. Since the eyes of the pinch bails are facing forward, the ear wires will be in perfect position - perpendicular to the pinch bails.
photo shows attaching ear wires
Attach the ear wires by opening and closing the eye hook in each wire with flat nose pliers.
photo shows attaching the ear wires
Both the White and the Black earring sets look so sparkly and fabulous for an evening out.
photo shows both pairs of earrings completed