Skip to product information
1 of 1

Sculpey Premo™ and Composi Mold Collaboration

Sculpey Premo™ and Composi Mold Collaboration

Designed by Amy Koranek
Read More
In this tutorial I’ll show you how to create a fun free style mandala. Then you can make a mold using Mold Making Putty, and make the mandala over and over and over again.

Designer’s Note - I used scrap clays to make my mandala and so the colors are going to be a little different from what I have specified in the supply list below.
Read Less
  • Ruler
  • 4” Circle cutter
  • 6 oz. ImPRESSive Putty One Part Re-Usable Mold Making Putty
  • Paper towel
  • Flat plate
  • Deli paper or other barrier paper like copy paper or an index card
View full details
Project Instructions
    Getting Started:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven-Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 30 minutes per 1/4" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
We will make a mandala first. As I stated above, I used scrap clays to create my mandala. You can use whatever clays you have since each detail area requires a small amount of clay. In this tutorial, I will call out some colors of clay that are similar to what I used.

Sheet Purple through a pasta machine on the thickest setting or use an Acrylic Clay Roller to flatten Purple to 1/8” thick and about 4” x 4” square.

Place the clay on barrier paper like a deli sheet, or copy paper, or an index card. The barrier between the clay and the work surface will keep the clay from sticking, making it easy to move the design around in front of you so that you can work on each section of the mandala from a straight up and down viewpoint.

Use a ruler and the tip of an Etch ‘n Pearl to score shallow lines to create a center point and guidelines in the clay.
photo shows marking clay as described
The details for the mandala are created using sheets of clay that are 1/8” thick and cut outs using the Mini Geometric Cutters.

Use the Circle cutter to cut out an Ultramarine Blue circle. Place it directly in the center of the Purple clay. Make a well in the center of the circle with the 12 mm Ball Tool. Use the Large Etch ‘n Pearl to seat a pearl of Purple in the well.
photo shows the start of the mandala as described
From a 1/8” thick sheet of Cobalt Blue, cut out eight teardrop shapes. Arrange the teardrops as shown radiating from the center. Use your guidelines to help line them up evenly.
photo shows the teardrops arranged as described
From a 1/8” thick sheet of Turquoise, cut out eight elipse shapes. Arrange them around the outside of the teardrops.
photo shows arranging the Turquoise pieces around the teardrops
From a 1/8” thick sheet of Pale Blue, cut out eight square shapes. Arrange them between the elipses.
photo shows the addition of the Pale Blue squares as described
Now comes the fun part! The doodling details! In each of the Pale Blue diamonds, I impressed a well using the 6 mm Ball Tool. Then I seated a pearl of Ultramarine Blue in each one using the Large Etch ‘n Pearl. Since I made the pearls a little too small for the Large Etch ‘n Pearl, I got those cool rings around each pearl when I pushed them into place.

Use the tips of the Etch ‘n Pearls to make lots of scored details as shown.

Use the round ends of the Etch ‘n Pearls to create circle impressions. Use the 2 mm Ball Tool to make little dot indents in the centers of the circles and around the middle circle.

Just have fun with it and add as many details as you like. Just make sure that all lines go straight in and straight out of the design so that you do not create undercuts. Undercuts don’t mold well like straight in and out cuts do.
photos shows the details being added as described
Finally, add a series of Small Etch ‘n Pearl pearls around the outside in Cobalt Blue.

Use a large 4” circle cutter to cut out the basic shape around the outside.
photo shows the Cobalt Blue pearls added to the outside of the pattern
Use the elongated diamond cutter to cut out around the edges between the small pearls.

Peel the mandala off of the barrier paper carefully. Bake the mandala following the baking instructions for Sculpey Premo™. Allow the piece to cool completely before handling.
Complete and bake the mandala as described
Follow the instructions included with the Mold Making Putty to get it soft and ready to mold. Patty the putty out into a thick piece - at least 3/8” thick - and large enough in diameter to contain the baked mandala.

I pattied the putty onto a flat plate so that I could easily move it out of my way for it’s curing time.
Prepare Mold Making Putty as direction on package
Using hand pressure, imbed the baked clay mandala face down in the putty.
photo shows embeding clay mandala in the putty
Make sure all the areas have been pushed into the putty and that the mandala is level in the putty so that the edges are molded as well as the interior design.
Make sure that the areas are level as described
Allow the putty to dry until it is stiff to the touch and the clay piece is ready to release easily from it - at least 4 hours.
photo shows the mandala mounted in the putty
Release the mandala from the mold completely.
Remove the mold from the putty
If there is an excess of activator (clear liquid) leaking out of the mold, wipe it away with paper towel before re-molding. At this point the mold will still be flexible.

Make a ball of whatever color clay you would like to mold. Here I’m using Concrete Sculpey Soufflé™. Make the ball large enough to fill the mold space.

Place the ball directly in the center of the mold.
photo shows pushing clay into the new mold
Using heavy fingertip pressure, flatten the ball from the center working outward.
photo shows pressing clay to outside edge of the mold
Keep working from the center outward flattening the ball into all the details.
keep working from center outward
Once you have spread the clay all the way to the edges, carefully move the clay away from the outer edge by pushing it back toward the center. You can also trim away excess clay with the Clay Blade. Smooth the interior clay with fingertip buffing.
photo shows the trimmed and smoothed clay in the mold
Carefully flex the mold so that you can release the clay design from it.
photo shows the mold flexing to release the clay
Inspect the molded clay to see if you need to touch up any of the details with your tools.
photo shows touching up any flaws
Bake the molded piece following the baking instructions for the clay that you used in the mold. The putty mold should not be placed in the oven - only the oven bake clay piece.

The putty mold can be used over and over to create more mandalas, or you can re-use it (following the mold making instructions) to make an entirely new mold.
photo shows the finished and baked molded piece