premo! Sculpey Two-in-One Envelope Pendant and Earrings
premo! Sculpey Two-in-One Envelope Pendant and Earrings
Read More
A silkscreen design on one side and texture on the other give you two looks in one.
Read Less
ADDITIONAL SUPPLIES
black acrylic paint, 3"diameter round cookie cutter, drinking straw or small round cutter, 2-1/2" diameter x 2" wide cardboard tube, water bottle, index card, scissors, pen, ruler, 180 grit wet/dry sandpaper, clear fast-drying glue, wire necklace, 2 silver ¼” Jump rings, 2 silver earring findings|black acrylic paint, 3"diameter round cookie cutter, drinking straw or small round cutter, 2-1/2" diameter x 2" wide cardboard tube, water bottle, index card, scissors, pen, ruler, 180 grit wet/dry sandpaper, clear fast-drying glue, wire necklace, 2 silver ¼” Jump rings, 2 silver earring findings
Project Instructions
Your workspace:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Work ‘n Bake Clay Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.
Getting Started:
Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.
Baking:
Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per ¼" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Work ‘n Bake Clay Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.
Getting Started:
Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.
Baking:
Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per ¼" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
Cut ¾ inch block of Yellow and form owl body shape.
Cut small pieces of Pink and shape into wings. Press onto body.
Pinch off 2 small pieces of White and roll into balls. Flatten and press onto face for eyes. Pinch off 2 tiny pieces of black and roll into tiny balls. Press on eyes to form eyeballs.
Pinch off a tiny piece of Pink and shape into a triangle for the beak. Place on face between the eyes.
Use toothpick to add details and make a hole side-to-side for stringing.
Cut ½ inch block of Purple and roll into snake. Cut 10 pieces from the snake and roll into 10 balls. Arrange into 2 flower shapes (5 petals each). Cut 2 small pieces of Pink and roll into balls press onto the flowers to form the flower centers.
Use the toothpick to add details to the petals and make a side-to-side hole in each flower for stringing
Make a smaller flower following the same steps and place on the owl’s head.
Bake as directed above in Step 1. Allow to cool and string on a ribbon.
Your workspace:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Work ‘n Bake Clay Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.
Getting Started:
Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.
Baking:
Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per ¼" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Work ‘n Bake Clay Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.
Getting Started:
Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.
Baking:
Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per ¼" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
Cut ¾ inch block of Yellow and form owl body shape.
Cut small pieces of Pink and shape into wings. Press onto body.
Pinch off 2 small pieces of White and roll into balls. Flatten and press onto face for eyes. Pinch off 2 tiny pieces of black and roll into tiny balls. Press on eyes to form eyeballs.
Pinch off a tiny piece of Pink and shape into a triangle for the beak. Place on face between the eyes.
Use toothpick to add details and make a hole side-to-side for stringing.
Cut ½ inch block of Purple and roll into snake. Cut 10 pieces from the snake and roll into 10 balls. Arrange into 2 flower shapes (5 petals each). Cut 2 small pieces of Pink and roll into balls press onto the flowers to form the flower centers.
Use the toothpick to add details to the petals and make a side-to-side hole in each flower for stringing
Make a smaller flower following the same steps and place on the owl’s head.
Bake as directed above in Step 1. Allow to cool and string on a ribbon.