Free Shipping on all Orders Over $20.00 in the continental United States! We do not ship internationally or to PO boxes

premo! Mokume Gane Lined Hollow Bead

In stock

From $2.49

To $129.98 Regular Price $133.98

This detailed and intricate necklace is a perfect project for our more advanced clayers.
Customize premo! Mokume Gane Lined Hollow Bead

* Required Fields

Your Customization
premo! Mokume Gane Lined Hollow Bead
premo! Mokume Gane Lined Hollow Bead

In stock

$2.49

Summary
    Pin Drill Small Screw-Eye Superglue 220 Wet/Dry Sandpaper 1” Hexagon Shape Cutter|Pin Drill Small Screw-Eye Superglue 220 Wet/Dry Sandpaper 1” Hexagon Shape Cutter

    Project Instructions

    Preheat oven to 275 °F. Test temperature with oven thermometer for perfectly cured clay. Condition all clay by kneading until it’s soft and smooth or running it through the Clay Conditioning Machine for several passes on the widest setting. Fold the clay in half after each pass and insert the fold side into the rollers first.
    Condition each color of clay and roll out onto a #4 setting on Clay Conditioning Machine or roughly 1/16" thick.
    Stack colors with Copper on bottom, Black in the middle, Silver on top. Press sheets together.
    Roll entire sheet through Clay Conditioning Machine on a #1 setting. Cut stack in half and stack again.
    Roll re-assembled sheet through on a #1 setting.
    Mist rubber stamp with a fine mist of water. Press design deeply into stack of clay, exerting even force. Remove stamp.
    Adhere stack of clay to a ceramic tile or sheet of glass so that it doesn't easily move.
    Your stamped design has high and low spots. You want to shave off the high spots with your Super Slicer. Hold each end of the blade and shave horizontally. Take your time.
    Preheat oven to 275 °F. Test temperature with oven thermometer for perfectly cured clay. Condition all clay by kneading until it’s soft and smooth or running it through the Clay Conditioning Machine for several passes on the widest setting. Fold the clay in half after each pass and insert the fold side into the rollers first.
    Condition each color of clay and roll out onto a #4 setting on Clay Conditioning Machine or roughly 1/16" thick.
    Stack colors with Copper on bottom, Black in the middle, Silver on top. Press sheets together.
    Roll entire sheet through Clay Conditioning Machine on a #1 setting. Cut stack in half and stack again.
    Roll re-assembled sheet through on a #1 setting.
    Mist rubber stamp with a fine mist of water. Press design deeply into stack of clay, exerting even force. Remove stamp.
    Adhere stack of clay to a ceramic tile or sheet of glass so that it doesn't easily move.
    Your stamped design has high and low spots. You want to shave off the high spots with your Super Slicer. Hold each end of the blade and shave horizontally. Take your time.