SIGN UP FOR NEWSLETTER
Newsletter
Sign up for our newsletter to receive special sales,
product sneak peeks, exclusive projects and more!
premo! Dotty Earrings
In stock
From $2.79
To $54.56
The combination of Wisteria, Periwinkle and Graphite pearl deliver the cutest “dotted” set of earrings.
Design by Patricia Kimle
1/8 circle punch (drinking straw or other tubing will work), Silver wire 2 1” silver headpins, Silver ear wires, 2 bi-cone crystal beads|1/8 circle punch (drinking straw or other tubing will work), Silver wire 2 1” silver headpins, Silver ear wires, 2 bi-cone crystal beads
Project Instructions
Getting Started:Polymer clay may stain. CLAY MAY DAMAGE UNPROTECTED FURNITURE OR FINISHED SURFACES. DO NOT USE polymer clay on unprotected surfaces. We recommend working on wax paper, metal baking sheet, or disposable foil. Start with clean hands and work surface area. Knead clay until soft and smooth. For best results, clean your hands in between colors. Shape clay, pressing pieces together firmly. Bake on oven-proof glass or metal surface at 275°F (130 °C) for 30 minutes per ¼" (6 mm) thickness. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME. Wash hands after use. Baking should be completed by an adult.Begin by preheating oven to 275 °F (130 °C). Test temperature with oven thermometer for perfectly cured clay. For best results, condition all clay by running it through the Clay Conditioning Machine for several passes on the widest setting. Fold the clay in half after each pass and insert the fold side into the rollers first.
Roll an 1/8 package of each color Pearl, Periwinkle and Wisteria into logs. Twist and roll the three colors together. Roll through the Clay Conditioning machine on the # 4 (medium) setting. Fold and re-roll until a nicely marbled pattern emerges.
Form two balls of Graphite Pearl about ¾” diameter. Punch circles from the marbled sheet and arrange them around the surface of the Graphite Pearl balls. Bake according to the directions above.
Thread crystals onto the head pins and trim wire to ¼”. Form a loop. Thread wire through clay beads and form a loop at each end. Connect the crystal loop at one end and the ear wire at the other.
