Free Shipping on all Orders Over $30.00 in the continental United States! We do not ship internationally or to PO boxes

Sculpey Souffle™ Tropical Earrings Featuring Unicorn Spit for Extra Sparkle

Designed by Syndee Holt

Starting at $2.79

Sculpey Souffle™ teams up with Pearl Ex and Unicorn Spit to highlight the textures on these earrings. Unicorn Spit adds that extra sparkle to any polymer clay project!

Grouped product items
Product ImageProduct Name Qty
Sculpey Soufflé™ Poppy Seed 1.7 oz
$2.79
Out of stock
Sculpey Tools™ Clay Conditioning Machine
$39.99
Sculpey Tools™ Graduated Cutters: Circle, 6 pc
$6.99
Sculpey Tools™ Graduated Cutters: Tear Drop, 6 pc
$6.99
Sculpey Tools™ Clay Blades
$14.99
Sculpey Tools™ Nature Texture Sheets
$9.99

• Unicorn Spit Gel Stain and Glaze (I’ve used Golden Gosling)
• Small paint brush and wipe or damp cloth
• Green Mica Powder (I’ve used Pearl Ex Spring Green)
• Needle tool or jewelers hand drill
• 7mm gold tone jump rings (2)
• Gold tone post findings (2)
• 2 pair of small jewelry pliers
• Instant glue
• Small spray bottle of water
• Folded baby wipe or paper towel

Additional Resources

    Getting Started:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven-Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

    Baking:
Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 30 minutes per 1/4" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
Sheet out about half a block of the conditioned Poppy Seed clay on the second from widest setting on the clay conditioning machine or roll with the acrylic roller to about 1/8 inch (3mm). Lightly spray the selected texture on the texture sheet with water and place face down on the clay sheet. (NOTE: put a clean piece of paper under the sheet of clay). Firmly press down on the texture sheet or use the acrylic roller to firmly press the texture into the clay. Remove the texture sheet and peel the paper from the textured clay sheet. Use a paper towel or micro fiber towel to lightly pat the texture to help remove the excess water from the texture.
Once the texture is completely dried, press just the tip of your finger into the mica powder and lightly swipe it over the top of the texture surface. NOTE: see how I’m using only the powder in the lid? You only need a tiny amount on your finger each time! Cover the entire textured area.
Use the second from largest (1.75”) of the teardrop cutters to cut out two teardrops. Use the smallest of the circle cutters (.75”) to cut out two circles from the remaining clay for the top of the earrings.
If you want to place the holes in your earrings before baking, position each pair of earrings the way that they will hang and use a large needle tool to press through the clay and create your assembly holes. Place the earrings on a clean sheet of paper on the baking tray and bake according to the directions in Step 1.
Once the pieces have baked and cool the fun really gets rolling! Shake your bottle of Unicorn Spit and squeeze a small amount into a small dish (I use my bottle caps). Gently brush the Unicorn Spit over the surface of the clay. Gently wipe the surface of the clay with a folded baby wipe or folded paper towel. Repeat for each of the four pieces.
If you are using a hand drill to place your holes, you can do so once the Unicorn Spit is dried.
To assemble the earrings, open one of the jump rings with the two pairs of jewelry pliers by lightly twisting at the ring opening. Feed the ring through the top of the teardrop piece and the bottom of the upper round piece before closing the jump ring. Repeat for the other earring.
Turn the earrings over and add a drop of instant glue to the center of the top circles and press the post finding into place. Allow the glue to dry and your earrings all complete!
Loading...