Free Shipping on all Orders Over $25.00 in the continental United States! We do not ship internationally or to PO boxes

Sculpey Premo™ Rustic Pendant or Brooch

Designed by syndee holt

Starting at $2.79

This cool organic looking design uses the Etch n’ Pearls to create tiny bowls that you fill with Liquid Sculpey!

TIME TO COMPLETE: 60 minutes to make and bake

Grouped product items
Product Name Qty
Sculpey Premo™ Bronze 2 oz
$2.79
Sculpey Premo™ Peacock Pearl 2 oz
$2.79
Sculpey Premo™ Gold 2 oz
$2.79
Liquid Sculpey® Pearl 1 oz
$3.99
Liquid Sculpey® Gold 1 oz
$3.99
Sculpey Tools™ Clay Conditioning Machine
$39.99
Sculpey Tools™ Clay Blades
$14.99
Sculpey Tools™ Etch 'n Pearl
$8.99
Sculpey Tools™ Dual End Detail Tools
$9.99
  • Organic looking stamp for texture
  • Exacto blade
  • Template for shape
  • Toothpicks
  • Pin back
  • Instant glue
  • Small damp sponge
  • Optional: small stick

Additional Resources

Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured Liquid Polymer Clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

Getting Started with Premo Clay:
Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

    Baking:
Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 30 minutes per 1/4" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.

Getting Started with Liquid Sculpey
Stir Liquid Sculpey® completely. Thin with Sculpey® Liquid Clay Softener as needed - Wash hands after use (we have found that baby wipes work best) .

    Baking:
• It is important to use oven thermometer when you bake the liquids so that you can ensure your oven is at the correct temperature. • Do not microwave the liquids. They must be baked in a Preheated oven at 275 ºF (130 ºC) for liquid colors and 300 ºF (149 ºC) for Clear – Do not exceed baking temperatures. • If your piece is less than 1/4” bake for 15 minutes. For thicker pieces that are 1/4” or above bake for 30 minutes. • If your liquid project has become yellowed or discolored in the oven, when you remake it, tent it by placing either – folding an index card in half and placing your project under it or by using aluminum foil over your project.
Sheet out a small section of the conditioned Bronze clay on a medium setting and apply your organic texture (mine is Judikins Esponge stamp). Use your selected template to cut out your design with an Exacto blade.
Sheet out another small piece of clay on the widest setting on the clay and place it under your shape. Use the Exacto blade to trim around this piece at about a 45 degree angle. (NOTE: I like to place my clay on a small piece of paper so that I can rotate it easily to cut). Once you have cut the shape out again, gently press your fingers around the edges of the shape to slightly round the edges of the clay (that’s what that 45 degree under cut was about!)
Sheet out a small piece of the Peacock Pearl. Mix another small piece of the Peacock Pearl with the Gold clay to create a metallic green color. You only need small portions of each of these colors. Sheet both colors out on the widest setting on the clay conditioning machine.
Press the largest Etch n’ Pearl into the damp sponge and then press firmly into one of the sheet of clay. Twist slightly and remove the tool. The “pearl” may remain on the paper or in the tool itself. If it is on the paper, press the tool into the sponge again and pick up the pearl with a scuffing motion. Gently press the pearl into place on the Bronze clay. Repeat to create your pattern using the large and medium Etch n’ Pearls.
Use the smallest Dual End Detail tool to gently open up each of the pearls. Start by pressing into the center of the pearl and then using a tight circular motion to open the pearl up. Repeat for all the pearls.
Squeeze a couple of drops of each of the Liquid Sculpey colors out on a smooth tile or I like to use empty clay wrappers. Dip your toothpick into a selected color and fill one of the opened pearls with this color. Add more Liquid Sculpey as needed and alternate between the Pearl and Gold LS.
Bake according to the directions above in Step 1. Glue a pin back to the brooch or mount as a pendant. I added a small textured twig to the side of mine with instant glue.
Loading...