Free Shipping on all Orders Over $20.00 in the continental United States! We do not ship internationally or to PO boxes

Sculpey® III Witch and Spider Dangle Pin

In stock

From $2.49

To $27.43


Helen Terlalis Dorn
Create this Dangle Pin (or create a fridge magnet) to add some spook to your holiday!  
Customize Sculpey® III Witch and Spider Dangle Pin

* Required Fields

Your Customization
Sculpey® III Witch and Spider Dangle Pin
Sculpey® III Witch and Spider Dangle Pin

In stock

$2.49

Summary
    • Acrylic Paint – White • Chalk – pink for cheeks • Permanent Marker – black • Black Wire, 24 gauge • Small gold jump ring • Seed Beads - black • Pin back - ¾” • Clear quick-drying glue • Needle Nose pliers (optional)|• Acrylic Paint – White • Chalk – pink for cheeks • Permanent Marker – black • Black Wire, 24 gauge • Small gold jump ring • Seed Beads - black • Pin back - ¾” • Clear quick-drying glue • Needle Nose pliers (optional)

    Project Instructions

    Your Workspace:
    Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Work ‘n Bake Clay Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

    Getting Started:
    Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

    Baking:
    Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per ¼" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
    Witch Face – roll a 1 1/4” ball of Tan into a round or oval shape and press it onto your work surface. Next add a nose made by rolling a ¼” of Tan and pressing it onto the face. Then, use the needle tool to make a smile/smirk. Dust cheeks and nose with pink chalk.
    Roll out thin logs of White for hair and press them into whatever style you wish on her head – just do the sides.
    For the Witch Hat – take a 7/8” ball of Black and taper it into a teardrop shape and pull the bottom out to make the brim of the hat. Flatten a small amount of purple to make a band and place it as shown in photo. Add a small jump ring as a buckle for added detail.
    Spider – Make the body using a flatten 7/8” ball of Black. Make 8, ¼” balls of Black and add four to each side.
    Spider’s Eyes – make two small teardrop shapes from Glow-In-The-Dark clay and place a Black seed bead in for pupils as you desire. Add two, Black clay ‘comma’ shaped pieces over his eyes and a purple oval nose.Using the needle tool from the Sculpey Clay Tool Starter set to create the mouth.
    Wiring – take a 2.5” length of 24 gauge black wire and crimp each end, then dab each end in super glue. Insert one end into the bottom middle of the witch’s head using a needle nose plier for ease of insertion. Then insert the other end into the top middle of the spider’s back.
    Spider’s Bow – using purple clay, make two small triangles and face them point to point. Mark them with indent lines with needle tool and add a tiny piece of Purple in between them. Place the bow on a diagonal over the top right leg.
    Bake as directed above in Step 1. When cooled/cured, use a black permanent marker to draw in the eyes and eyebrows for the witch. Dot the eyes with white acrylic paint on the witch. Glue the pin back into place.

    NOTE: You can use either Sculpey® Gloss or Satin glaze to finish your pieces!
    Your Workspace:
    Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Work ‘n Bake Clay Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

    Getting Started:
    Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

    Baking:
    Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per ¼" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
    Witch Face – roll a 1 1/4” ball of Tan into a round or oval shape and press it onto your work surface. Next add a nose made by rolling a ¼” of Tan and pressing it onto the face. Then, use the needle tool to make a smile/smirk. Dust cheeks and nose with pink chalk.
    Roll out thin logs of White for hair and press them into whatever style you wish on her head – just do the sides.
    For the Witch Hat – take a 7/8” ball of Black and taper it into a teardrop shape and pull the bottom out to make the brim of the hat. Flatten a small amount of purple to make a band and place it as shown in photo. Add a small jump ring as a buckle for added detail.
    Spider – Make the body using a flatten 7/8” ball of Black. Make 8, ¼” balls of Black and add four to each side.
    Spider’s Eyes – make two small teardrop shapes from Glow-In-The-Dark clay and place a Black seed bead in for pupils as you desire. Add two, Black clay ‘comma’ shaped pieces over his eyes and a purple oval nose.Using the needle tool from the Sculpey Clay Tool Starter set to create the mouth.
    Wiring – take a 2.5” length of 24 gauge black wire and crimp each end, then dab each end in super glue. Insert one end into the bottom middle of the witch’s head using a needle nose plier for ease of insertion. Then insert the other end into the top middle of the spider’s back.
    Spider’s Bow – using purple clay, make two small triangles and face them point to point. Mark them with indent lines with needle tool and add a tiny piece of Purple in between them. Place the bow on a diagonal over the top right leg.
    Bake as directed above in Step 1. When cooled/cured, use a black permanent marker to draw in the eyes and eyebrows for the witch. Dot the eyes with white acrylic paint on the witch. Glue the pin back into place.

    NOTE: You can use either Sculpey® Gloss or Satin glaze to finish your pieces!