Free Shipping on all Orders Over $49.99 in the Contiguous United States! We do not ship internationally or to PO boxes.

Sculpey® III - Lattice Pendant

Designed by Amy Koranek

This graphic pendant is a quick and easy project that can be adapted to several different silkscreen patterns and clay colors.

Save To Create Later
Grouped product items
Product ImageProduct Name Qty
Sculpey III® Teal 2 oz
Special Price $0.99 Regular Price $2.99
Sculpey Tools™ Clay Conditioning Machine
$52.99
Sculpey Tools™ Graduated Cutters: Circle, 6 pc
$8.99
Sculpey Tools™ Graduated Cutters: Oval, 6 pc
Special Price $0.99 Regular Price $8.99
Sculpey Tools™ Hollow Bead Maker
Special Price $9.99 Regular Price $19.99
Sculpey Tools™ 8-Inch Acrylic Clay Roller
$9.99
Sculpey Tools™ Clay Blades
$17.99
Sculpey Tools™ Dual End Detail Tools
$12.99
Sculpey Tools™ Floral Silk Screens
$7.99
Sculpey® III - Lattice Pendant
Click image to open expanded view
Sculpey® III - Lattice Pendant
  • Black acrylic paint
  • Water basin for rinsing the screen immediately
  • White pony beads (2)
  • 28” Black silk cord
  • Scissors

Project Instructions

    Getting Started:
Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven-Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

    Baking:
Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per 1/4" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
Sheet Teal Sculpey®III through the pasta machine on the thickest setting. Hand roll over it with the Acrylic Clay Roller to smooth out any ripples.
Burnish the shiny side of the Lattice screen to the clay. Place a thin line of the paint across the top of the Lattice pattern. Drag the squeegee pulling the paint at a 45 degree angle across the clay. Immediately peel the screen away from the clay and place it in a basin of water or rinse under running water to clean it. In this photo I show that I screened the image twice, but you will only need one to complete the project.
Using the second largest oval, cut out an oval shape that goes through the Lattice design and leaves a blank area on the right side as shown. Use the 1” circle cutter to cut out another piece from the Lattice design. Smooth all the cut edges with your fingertips.
Use the 2 mm ball tool to poke a hole through the top of the oval shape for stringing. Poke through from the front and then from the back, repeatedly until you gradually make the hole large enough. Smooth any rough edges around the hole at the back.
Cut another circle from the Teal, this one does not need to be screened, and add it to the back of the screened piece to make it double thick.
Smooth the edges of the circle bead on both sides. Poke a hole through the center with the 2 mm ball tool. Start with the first poke through the front, then go through the back and repeat until the hole is large enough. Smooth rough edges around the hole on the back.
Press the oval to the largest dome on the Hollow Bead Maker to give it shape. Bake the Hollow Bead Maker and the single circle bead following the baking instructions for Sculpey®III. [
Allow the pieces to cool completely before assembly. Fold the cord in half and run the loop of the cord through the oval piece first. String the tails of the cord through the loop in the cord and pull tight. String a pony bead onto both cords sitting just above the oval. Thread one cord through from the front of the circle and one cord through from the back. String another pony bead on both strings to sit just above the circle. Tie a double knot in the cord at the very end. Trim the tails.
Loading...