Free Shipping on all Orders Over $20.00 in the continental United States! We do not ship internationally or to PO boxes

Sculpey® III Frankenstein and Hand Dangle Pin

In stock

From $2.49

To $43.94


Helen Terlalis Dorn
A dangling hand from Frankenstein's neck, wait he's too cute to scare anyone. Lot's of smiles though!   NOTE:   You can also choose to use either Sculpey Gloss or Satin glaze!
Customize Sculpey® III Frankenstein and Hand Dangle Pin

* Required Fields

Your Customization
Sculpey® III  Frankenstein and Hand Dangle Pin
Sculpey® III Frankenstein and Hand Dangle Pin

In stock

$2.49

Summary
    • Acrylic Paint – White • Chalk – Pink • Toothpick • Straight pins (2) • Black Wire-24 gauge • Seed Beads (2) • Pinback - ¾” • Clear fast-drying Glue • Needle Nose pliers (optional)|• Acrylic Paint – White • Chalk – Pink • Toothpick • Straight pins (2) • Black Wire-24 gauge • Seed Beads (2) • Pinback - ¾” • Clear fast-drying Glue • Needle Nose pliers (optional)

    Project Instructions

    Your workspace:
    Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Work ‘n Bake Clay Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

    Getting Started:
    Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

    Baking:
    Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per ¼" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
    Frankenstein’s Face – roll a 1” ball of Beige into an elongated face and press it onto your work surface. Next add a nose made by rolling a ¼” of Beige and pressing it onto the face (you can also use Super Sculpey). Then using the needle tool make a smile/smirk. Dust cheeks and nose with pink chalk.
    Hair – roll a ½” ball of Black into a square and add ‘hair’ lines using needle tool and add to top of head (use light pressure to make sure it is secure). Add more indentations for ‘hair’. Roll two small balls of Beige into teardrop shapes for ears. Press one on each side of the head and add an indention in each with the needle tool.
    Eyes – make two small teardrop shapes using the Glow in the Dark and add to face. Next, place a black seed bead in for pupils where you desire.
    Neck – Using a small amount of Beige make a small log and press into the chin area (you may wish to insert a small piece of toothpick into the chin beforehand for added security).
    Shirt/Button – Flatten a 1/2” ball of Green into a rectangle and shape as desired. Add a tiny ball of purple and indent for button. To make the Bolts – Cut two pin/needles with heads on them and insert into the neck – or make them with gray clay (mix black and white)
    Hand – Roll ½” ball of Beige into a log and flatten, make 3 slices to make fingers and smooth the edges/refine the shapes of the fingers. Add knuckle lines with needle tool and dust with chalk
    Fingernails – Place tiny circles of Black onto the tips of the fingers to make fingernails.
    Wiring – take a 2.5” length of 24 gauge black wire and crimp each end, then dab each end in clear glue. Insert one end into the bottom of the Frankenstein head (using a needle nose pliers for ease of insertion) then insert the other end into the top middle of the hand.
    Bake as directed above in Step 1. When cooled/cured, seal with glaze if you wish! Glue the pin back to the Frankenstein head.
    Your workspace:
    Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Work ‘n Bake Clay Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.

    Getting Started:
    Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.

    Baking:
    Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per ¼" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
    Frankenstein’s Face – roll a 1” ball of Beige into an elongated face and press it onto your work surface. Next add a nose made by rolling a ¼” of Beige and pressing it onto the face (you can also use Super Sculpey). Then using the needle tool make a smile/smirk. Dust cheeks and nose with pink chalk.
    Hair – roll a ½” ball of Black into a square and add ‘hair’ lines using needle tool and add to top of head (use light pressure to make sure it is secure). Add more indentations for ‘hair’. Roll two small balls of Beige into teardrop shapes for ears. Press one on each side of the head and add an indention in each with the needle tool.
    Eyes – make two small teardrop shapes using the Glow in the Dark and add to face. Next, place a black seed bead in for pupils where you desire.
    Neck – Using a small amount of Beige make a small log and press into the chin area (you may wish to insert a small piece of toothpick into the chin beforehand for added security).
    Shirt/Button – Flatten a 1/2” ball of Green into a rectangle and shape as desired. Add a tiny ball of purple and indent for button. To make the Bolts – Cut two pin/needles with heads on them and insert into the neck – or make them with gray clay (mix black and white)
    Hand – Roll ½” ball of Beige into a log and flatten, make 3 slices to make fingers and smooth the edges/refine the shapes of the fingers. Add knuckle lines with needle tool and dust with chalk
    Fingernails – Place tiny circles of Black onto the tips of the fingers to make fingernails.
    Wiring – take a 2.5” length of 24 gauge black wire and crimp each end, then dab each end in clear glue. Insert one end into the bottom of the Frankenstein head (using a needle nose pliers for ease of insertion) then insert the other end into the top middle of the hand.
    Bake as directed above in Step 1. When cooled/cured, seal with glaze if you wish! Glue the pin back to the Frankenstein head.