Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured Liquid Polymer Clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately. - Stir Liquid Sculpey® completely. Thin with Sculpey® Liquid Clay Softener as needed - Wash hands after use (we have found that baby wipes work best)
•It is important to use oven thermometer when you bake the liquids so that you can ensure your oven is at the correct temperature.•Do not microwave the liquids. They must be baked in a Preheated oven at 275 ºF (130 ºC) for liquid colors and 300 ºF (149 ºC) for Clear – Do not exceed baking temperatures.•If your piece is less than 1/4” bake for 15 minutes. For thicker pieces that are 1/4” or above bake for 30 minutes. •If your liquid project has become yellowed or discolored in the oven, when you remake it, tent it by placing either – folding an index card in half and placing your project under it or by using aluminum foil over your project.
Make sure that your mold is clean and dry and place it on the baking tile. Stir your Gold LS and squeeze into the selected mold to fill it about 3/4 of the way to the top. Now let the mold rest a minute so that the clay can settle. Carefully add another dollop of LS and allow it settle. Continue unto the mold is COMPLETELY filled to the top, but not overflowing. NOTE: A toothpick can be used to help guide the clay around the post at the top. The surface tension may make it look like the clay is bulging slightly. Don't worry if the post gets covered a little- it's very easy to pop it out or drill it out after baking.
You may want to fill the other molds as well, using other colors before sprinkling a small amount of the Pink Holo Dot Mix on the surfaces! Just a pinch should do it. I get really picky and use a toothpick that has some of the LS rubbed onto the point to pick up a dot and place it. Once your mold is filled, carefully move it to preheated oven and bake it according to the directions above. Make sure to keep the mold level at all times so that you don't break the surface tension.
Once the mold has baked and cooled, just pop out the pendants. If the hole at the top is a little blocked, just use a toothpick to clean the hole. A small pair of sharp scissors can be used to clean up any excess clay around the edges of the pendant. Add your jump ring and chain and you are ready!
SIGN UP FOR NEWSLETTER
Sign up for our newsletter to receive special sales, product sneak peeks, exclusive projects and more!