Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Oven Safe Work Mat, wax paper, metal baking sheet, or disposable foil. Uncured Liquid Polymer Clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately. - Stir Liquid Sculpey® completely. Thin with Sculpey® Liquid Clay Softener as needed - Wash hands after use (we have found that baby wipes work best)
• It is important to use oven thermometer when you bake the liquids so that you can ensure your oven is at the correct temperature. • Do not microwave the liquids. They must be baked in a Preheated oven at 275 ºF (130 ºC) for liquid colors and 300 ºF (149 ºC) for Clear – Do not exceed baking temperatures. • If your piece is less than 1/4” bake for 15 minutes. For thicker pieces that are 1/4” or above bake for 30 minutes. • If your liquid project has become yellowed or discolored in the oven, when you remake it, tent it by placing either – folding an index card in half and placing your project under it or by using aluminum foil over your project.
Make sure the silicone mold is clean and dry. Pull little bits of leaf from a sheet of leaf with tweezers. Carefully place the pieces of leaf in the medium triangle cabochon shape.
Stir the Greige Liquid Sculpey in the bottle using one of the purple clay tools. Slowly and carefully fill the mold shape with Greige LS. Be sure to cover the little bits of leaf first so they don’t float up into the liquid. Only fill the mold to within 1/16” from the top so that there will be room to add the ring finding later. Gently tap the mold on the table to release air bubbles.
Bake the mold following the baking instructions for LS. Allow the mold to cool completely. Position the ring finding on top of the triangle as shown.
Back fill the rest of the depth of the shape with more Greige LS. Also cover over the edges of the mounting spot to anchor the finding into place. Bake again following the baking instructions for LS.
When the mold is completely cool, carefully flex the mold to remove the ring. So simple, so unique, so stylish - the perfect design trio!
SIGN UP FOR NEWSLETTER
Sign up for our newsletter to receive special sales, product sneak peeks, exclusive projects and more!