Sculpey III Wild Heart Textured Earrings

Step 1:

Getting Started: Do not use unbaked clay on unprotected furniture or finished surfaces. Start with clean hands and work surface area. Good work surfaces include wax paper, metal baking sheet, or disposable foil. Knead clay until soft and smooth. For best results, clean your hands in between colors. Shape clay, pressing pieces together firmly. Bake on oven-proof glass or metal surface at 275 degrees F (130 degrees C) for 15 minutes per ¼” (6mm) thickness. For best baking results, use and oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME. Wash hands after use. Baking should be done by an adult. Begin by preheating oven to 275 degrees F (130 degrees C). Test temperature with oven thermometer for perfectly cured clay. For best results, condition all clay by running it through the clay dedicated pasta machine several passes on the widest setting. Fold the clay in half after each pass and insert the fold side into the rollers first.

Step 2:

Getting Started: Do not use unbaked clay on unprotected furniture or finished surfaces. Start with clean hands and work surface area. Good work surfaces include wax paper, metal baking sheet, or disposable foil. Knead clay until soft and smooth. For best results, clean your hands in between colors. Shape clay, pressing pieces together firmly. Bake on oven-proof glass or metal surface at 275 degrees F (130 degrees C) for 15 minutes per ¼” (6mm) thickness. For best baking results, use and oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME. Wash hands after use. Baking should be done by an adult. Begin by preheating oven to 275 degrees F (130 degrees C). Test temperature with oven thermometer for perfectly cured clay. For best results, condition all clay by running it through the clay dedicated pasta machine several passes on the widest setting. Fold the clay in half after each pass and insert the fold side into the rollers first.

Step 3:

Carefully smear mica powder onto the raised surfaces of the textured clay with your fingertip. Try to keep the mica powder from going into the recessed areas so that the Poppy color shows through. Cut out two large hearts shapes using the Irregular Heart Cutters. Cut one of the hearts from the clay from the front side. Cut the other heart out of the clay from the back side of the clay so they will be mirror imaged.

Step 4:

Smooth the cut edges with your fingertips to take off the bluntness. Be careful to not smear the mica powder into the crevices. Poke holes near the top with the needle tool. Make sure the holes are large enough to accommodate the large jump rings.

Step 5:

Bake the hearts following the baking instructions. Allow them to cool completely. Seal the mica powder areas with a thin layer of Sculpey Glossy Glaze on a paintbrush. Allow to dry completely. Add five 6mm jump rings to each of the 10mm jump rings. Place the 10mm jump rings through the holes in the hearts with the 6mm jump rings laying on top of the hearts. Connect 4mm jump rings to each of the 10mm jump rings and an ear wire. Make sure all the jump rings are closed properly.