Round glass jar from any crafts store, Silver mica powder, Water spray bottle, small piece of course sand paper
Polymer clay may stain. CLAY MAY DAMAGE UNPROTECTED FURNITURE OR FINISHED SURFACES. DO NOT USE polymer clay on unprotected surfaces. We recommend working on the Sculpey ® clay mat, wax paper, metal baking sheet, or disposable foil. Start with clean hands and work surface area. Knead clay until soft and smooth. For best results, clean your hands in between colors. Shape clay, pressing pieces together firmly. Bake on oven-proof glass or metal surface at 275°F (130°C) for 15 minutes per ¼" (6 mm) thickness. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME. Wash hands after use. Baking should be completed by an adult. Begin by preheating oven to 275°F (130 °C). Test temperature with oven thermometer for perfectly cured clay. For best results, condition all clay by running it through the Clay Conditioning Machine for several passes on the widest setting. Fold the clay in half after each pass and insert the fold side into the rollers first.
Mokume Gane Technique
Make a sheet of Acid Yellow, Sweet Potato and Teal Pearl on the #1 setting of the Clay Conditioning Machine, cut into approximately 4.5 x 2.25 rectangles. Stack the Acid Yellow with the Sweet Potato and pass through the Clay Conditioning Machine on the #1 setting, cut the sheet of clay in half.Sandwich the Teal Pearl in between the two sheets of Acid Yellow and Sweet Potato and run through the Clay Conditioning Machine on the #1 setting.Cut another thin sheet in half and stack and repeat this step two more times.
Spray the stack of clay with water. Using the graduated diamond cutters (1.25” and 2”)and the Blunt Point Tool and the Needle Tool from the Essential Kitimpress them into the clay as shown. Using the flexible Super Slice blade slice off thin sheets of the clay, cut three 2 x 2.5 rectangles.
Pass through a long sheet of Black clay on the # 3 setting of the clay Conditioning Machine. Make sure it is wide enough to cover the entire glass jar. Wrap the Black clay around the glass jar. Cut off any excess clay. Use the course sand paper texture the clay all the way around the jar.
Press the Mokume Gane rectangles made in step 1 to three sides of the jar.
Make a sheet of Black clay on # 2 setting of the Clay Conditioning Machine and cut into ½ “strips. Use the Texture Wheel (argyle Pattern) to press the argyle pattern onto the strips. Cut six 3” and six 3 ½” strips then cut the ends in an angle, to fit around each of the Mokume Gane rectangles.
Arrange the strips made in step 5 around the Mokume Gane rectangles. Now the final touch, with your fingertip dap the Silver Mica Powder onto the border until all strips are covered.
Bake according to the clay manufacturer directions.
Sign Up for Our Newsletter
Sign up for our newsletter and get special sales, product sneak peeks, projects and more!
Add a little fun to your inbox!
Sign Up for our Newsletter
And add a little fun to your inbox!
Sign up for the Sculpey newsletter and discover new products, new projects and exclusive crafting tutorials.