Please make sure your work area is covered and you are not working on an unprotected surface. We recommend working on the Sculpey® Work ‘n Bake Clay Mat, wax paper, metal baking sheet, or disposable foil. Uncured clay may damage unprotected furniture or finished surfaces. Be sure to cover your crafting area appropriately.
Start with clean hands, unwrap and knead clay until soft and smooth, or condition by running clay though a Pasta Machine. We recommend using a designated machine for clay purposes only. When working with multiple colors, clean hands with soap and water or baby wipes (we have found that baby wipes work best) before switching colors. Shape clay, pressing pieces firmly together. Wash hands after use.
Begin by preheating oven to 275 °F (130 °C). After you are done creating; for best results bake clay on an oven-proof surface such metal, aluminum foil, an index card or the Sculpey® Clay Mat at 275°F (130 °C) for 15 minutes per ¼" (6 mm) thickness according to package directions. Oven safe glass or ceramic surfaces are also acceptable for baking; however please note that the baking times may take longer as the glass or ceramic surfaces take longer to heat up. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME.
Roll Beige clay into a 7” long x 1/4” thick snake. Roll out snake of each Purple and Lime Green that are 7” Long x 1/8” thick and wrap around the Beige snake. Slightly roll the log to make it smooth. Shape the log into a 4” ring. Cut off any access clay. Press one hole through the top and three holes through the bottom (from the top or bottom to the center of the loop). Bake according to the directions above in Step 1 and let cool completely
Using the extruder and the medium circle disc, make a long Bright Green snake from the Bake Shop clay. Secure the snake at the top of the ring and then wrap around the ring is seen in the picture, spacing the gaps at about 1 inch. Make sure to not cover the holes you made in Step 2. Secure the end. Bake according to the directions above in Step 1 and let cool completely.
Make three ½” Green balls of Pluffy clay and shape into oval beads. Make nine 1/4” Purple balls, five 1/2” Aqua balls and shape two of them into oval beads and four 3/8” Pink beads shaped into discs. Press holes through all of them using the Needle tool in the Bead Making Kit or toothpick and bake on the Clay Baking Cushion according to the directions above in Step 1 and allow to cool.
Attach the beads with the pink thread to the dream catcher, as seen in the picture. Place small knots underneath some of the beads to keep them in place.
Sign Up for Our Newsletter
Sign up for our newsletter and get special sales, product sneak peeks, projects and more!
Add a little fun to your inbox!
Sign Up for our Newsletter
And add a little fun to your inbox!
Sign up for the Sculpey newsletter and discover new products, new projects and exclusive crafting tutorials.