Add a special sparkle to your holiday decorating.
Premo! Twinkle, Twinkle Star Ornament
Step 1:Do not use unbaked clay on unprotected furniture or finished surfaces. Start with clean hands and work surface area. Good work surfaces include wax paper, metal baking sheet, or disposable foil. Knead clay until soft and smooth. For best results, clean your hands in between colors. Shape clay, pressing pieces together firmly. Bake on oven-proof glass or metal surface at 275°F (130°C) for 30 minutes per ¼" (6 mm) thickness. For best baking results, use an oven thermometer. DO NOT USE MICROWAVE OVEN. DO NOT EXCEED THE ABOVE TEMPERATURE OR RECOMMENDED BAKING TIME. Wash hands after use. Baking should be completed by an adult. Begin by preheating oven to 275°F (130 °C). Test temperature with oven thermometer for perfectly cured clay. For best results, condition all clay by running it through the clay dedicated pasta machine several passes on the widest setting. Fold the clay in half after each pass and insert the fold side into the rollers first.
Step 4:Lightly roll over the star with the clay roller to make sure there are not air bubbles between it and the Black circle. Spritz the Gold star lightly with water. Press the texture into the surface of the Gold star. Roll over the texture sheet with the roller. Blot any excess water with paper towel.
Step 8:Roll a very thin rope of Gold about 1/8" thick and at least 20" long. Cut 2" pieces with tapered ends from the rope. You will need ten. Roll each piece up starting at the fat end to make a curly Q. Leave a little tail on each one. Position the curly Q's so that the little tail is alongside the club piece and the curled side is lined up with the star's edge. Position two curly Q's along each of the clubs.
Step 13:Using the largest Etch 'n' Pearl tool, place a pearl in the intersection of each of the star points. Using the medium Etch 'n' Pearl tool, place a pearl at the tip of each of the small star points. Use the smallest ball tool to make a divot in the center of each pearl. Poke a hole in the top of the star where you would like the ribbon to attach. Bake as directed above.
Socialize with us
Socialize with us
- Sculpey® Clay Conditioning Machine
- Sculpey Acrylic Roller
- Sculpey Etch ‘N Pearl
- Sculpey Style and Detail Tools, Set of 3
3.75" Circle cutter
3.75" Star cutter
2" Star cutter
Water spritzer and paper towels
11" Coordinating ribbon