8. Using
rest of black clay, shape as shown for kitty’s body,
head, legs, ears and tail. Be sure to flatten the ends of the “back” legs,
as these will go behind the kitty’s body.
9. Press all pieces together as shown. Be sure to place the head
slightly over the top of the body. Same with the tail. Press ears
and legs firmly to body as shown.
10. Use the pasa machine or roller to create a very very thin sheet
of white clay. Use the clay blade or Xacto knife to cut a crescent-shaped
grin. Press on top of face as shown.
11. Use needle tool to press a crescent line in half the grin as
shown.
12.
Press several vertical lines in for teeth.
13. Press a line all the way around the mouth.
14.
Roll the pearl Premo into a fat tube, flatten a sheet of light
blue Premo,
and roll the tube up in a “bullseye” cane.
15. Slice two thick slices from the bullseye, and shape into teardrops.
16. Use the tip of the needle tool to press lines in for wings.
17. Press the wings on
top of kitty’s body as shown.
18. Press baked eye cane slices into face. Make two tiny balls for
ears, press on ears. Make a small triangle-shaped piece for the nose,
press between eyes. Use needle tool to press smile lines and eyebrows
onto face if desired.
19. Press toes into feet with needle tool, front and back.
20.
Cut blue wire into two pieces: One should be 2 inches long,
the other measures ½ inch.
Shape the 2 inch piece into a halo as shown. 
21.
Press the long end of the halo into the middle top of kitty’s
head.
22. Shape the ½ inch
piece of blue wire as shown.
23. Press wire between wings into top of kity’s back. Bake
kitty at 275 degrees for 35 minutes, allow to cool. Tie string
onto loop and hang from rearview mirror, or make several different
colored
kitties and string them together on a dwel, hang from ceiling in
a room for an entire menagerie of Angel Kitties!
Click
Here For Part I
|
